Question 1

How much does a shipping container pool cost?

Accepted Answer

Midwest Container Pools offers two sizes: a 20ft container pool starting at $46,440 and a 40ft container with tanning ledge at $68,790. Each pool includes a fiberglass liner in a classic blue shade, Hayward cartridge filter system with pump, two skimmers, two returns and Pentair LED lighting, composite decking around the pool edge (available in any brand or color), and a fully customizable exterior — choose colors and finishes to complement your backyard.

Question 2

Is a container pool an above ground pool?

Accepted Answer

A container pool can be installed above ground, in-ground, or partially in-ground. Above-ground installation is fully plug-and-play: place on a level surface with 4 inches of compacted gravel, fill with water, connect to a 110v-220v 30 Amp GFCI circuit, and swim the same day it arrives.

Question 3

Do you deliver container pools nationwide?

Accepted Answer

Yes. Midwest Container Pools delivers throughout the continental United States from our facility in Leavenworth, KS. The pool ships by truck to your property's front access point. We coordinate logistics and provide tracking information.

Question 4

What equipment is needed to position a container pool?

Accepted Answer

The empty pool weighs approximately 2.7 tons (5,400 lbs) and has 4 corner castings built into the container for crane lifting. A standard crane with rigging hardware positions the pool in minutes. We can recommend local crane operators in your area.

Question 5

What electrical supply does a container pool need?

Accepted Answer

A container pool requires a dedicated 110v to 220v, 30 Amp supply on a ground fault circuit interrupter (GFCI) protected circuit. A licensed electrician can typically install this in under an hour. All internal electrical connections come pre-wired from the factory.

Question 6

How quickly can a container pool be delivered?

Accepted Answer

Midwest Container Pools typically delivers pools within 4 to 6 weeks of payment. Exact timing depends on your location within the continental US and scheduling with local crane operators.

Question 7

How long does container pool installation take?

Accepted Answer

Above-ground installation takes hours — you can swim the same day the pool is delivered. Position with a crane, fill with water, connect to power, and swim. In-ground installation requires site excavation but is still dramatically faster than traditional pool construction, which takes 3 to 6 months. Total timeline from order to swimming is 4 to 6 weeks.

Question 8

What warranty comes with a Midwest Container Pool?

Accepted Answer

Every pool includes a 5-year structural warranty covering the steel container, fiberglass interior, and foam insulation. Equipment and parts carry a 3-year warranty. We stand behind every pool we build.

Question 9

Can you heat a container pool?

Accepted Answer

Yes. Plumbing connections for heaters and heat pumps are included in every pool. The high-density foam insulation between the fiberglass shell and steel container achieves 95%+ heat retention, making container pools significantly more efficient to heat than traditional pools or uninsulated container pools.

Question 10

What colors are available for a container pool?

Accepted Answer

The fiberglass interior comes in a classic blue shade. The exterior is fully customizable — choose colors and finishes to complement your backyard.

Question 11

How much maintenance does a container pool require?

Accepted Answer

Container pools require minimal maintenance compared to traditional pools. The fiberglass surface resists algae growth and reduces chemical consumption. Weekly maintenance takes about 10 minutes: brush the walls, check chemical levels, and empty the skimmer basket. The Hayward cartridge filter requires no backwashing.

Question 12

Can a container pool increase my property value?

Accepted Answer

Yes. An in-ground or above-ground container pool adds usable outdoor living space, which appraisers consider when valuing a property. Above-ground installations have the added benefit of portability — if you move, you can take the pool with you. Many Airbnb and rental property owners report significantly higher booking rates after installing a container pool.

Question 13

What sizes are available for container pools?

Accepted Answer

Midwest Container Pools offers two sizes: a 20ft container pool (20' × 8' × 4') starting at $46,440, and a 40ft container with tanning ledge at $68,790. Both sizes include the full equipment package with fiberglass liner, Hayward filtration, Pentair LED lighting, composite decking, and a fully customizable exterior.

Your Questions, Answered

Still Have Questions?